Silent Call Signaling System

What is Silent Call?

Silent Call signalers will alert you to a variety of events around your home that may be difficult or impossible to hear, like a ringing telephone or doorbell. Alerts can be received via vibration, flashing lamp or strobe. Silent Call offers some unusual signaling options that differ from other systems, so if you need something outside of telephone and doorbell, Silent Call might be right for you.

All of Silent Call's systems require both a transmitter and a receiver. The transmitters will not signal on their own. You can use one signaler to alert you to all of Silent Call's products, or you can place a different receiver in each room. An LED panel on the receiver will direct you to the source of the alert. For example, you may have a Phone Ring Signaler, a Doorbell Signaler and a Sound Signaler in your home. You have additional receivers in your living room, kitchen and bedroom. When your telephone rings, it triggers the Phone Ring Signaler, which flashes the connected lamp, and sends a signal to all of the other receivers, which all signal you, as well. You see the flash of the lamp, and pick up the phone.

Selecting Silent Call products from our web site.

First, choose what you'd like to be alerted to.

Telephone Only

SC540 - Plugs into your phone line and sends a signal to any receiver.
Doorbell Only

SC532 - For houses with an existing system. Pressing the existing doorbell will send a signal to any receiver in addition to ringing the existing chime.

SC534 - For houses without an existing system. Pressing the included doorbell will send a signal to any receiver.
Motion Sensors

SC546 - A pressure sensing pad alerts you when someone enters or leaves a room. Sends a signal to any receiver.

SC536 - When the magnets are separated, this sensor activates to let you know someone has opened a door, window or cupbord. Sends a signal to any receiver.
Miscellaneous Sounds

SC538 - Signals sounds over 15 seconds in duration. Sends a signal to any receiver. Fire/Carbon Monoxide Alarms

SC542 - Wires into an existing smoke alarm system. Sends a signal to any receiver. Select battery or electric power.

SC520 - Self contained smoke detector sends a signal to any receiver when activated.

SC514 - Self contained carbon monoxide detector sends a signal to any receiver when activated.

You'll have to purchase at least one receiver to use the Silent Call system. Al lreceivers provide a visual or vibration alert, and have an LED panel to direct you to the source of the alert. We've sorted them here by the type of alert they provide.

Lamp

SC548 - Table top unit flashes a lamp in a distinctive pattern. Lamp can be used for lighting and signaling.
Strobe Light

SC526 - Flashes the built in strobe. Strobe is decorated with a laser generated scene.

SC524 - Flashes a built in strobe light.
Vibration

SC541 - Pager style receiver can be carried with you. 100 foot range.

You may also attach a bedshaker # SC510 to either of the strobe light receivers (SC526, SC524) above for a vibration and visual alert.

You may also email info@soundbytes.com or call (888) 816-8191 for assistance in purchasing a Silent Call product.